Posts Tagged ‘jaunty’

Jaunty vs Lucid Reboot Time

August 23rd, 2010 subogero Comments off

I’ve measured the reboot time after the Lucid install on the ASUS UL20A. That’s what I call progress.

                         Jaunty  Lucid
from power-on until login  19 s   20 s
from login until ready     15 s    5 s
power off                  12 s    5 s
overall reboot time        46 s   35 s

ASUS UL20A Brightness Buttons

December 24th, 2009 subogero 10 comments

As I’ve mentioned before, ubuntu 9.04 Jaunty has been running fine on my ASUS UL20A laptop. Except the screen brightness buttons, Fn-F5 (down) and Fn-F6 (up).

Fn-F5 was setting brightness to the darkest value while Fn-F6 to the second darkest one. I’ve managed to create a crufty workaround, detailed below. It’s all about hacking the configuration of acpid (the ACPI daemon).

Set Brightness Directly

There is a special file called /proc/acpi/video/VGA/LCDD/brightness which lists the available and the actual brightness values. Brightest is shown below.

szg@OG3:/proc/acpi/video/VGA/LCDD$ cat brightness
levels:  10 16 22 28 34 40 46 52 58 64 70 76 82 88
current: 88

Setting brightness is done by writing a number into this file, the example shows darkest possible.

echo 10 > /proc/acpi/video/VGA/LCDD/brightness

Explore What Events the Brightness Keys Generate

Start the program called “acpi_listen”, which will print power-management related events when they happen.

When hitting Fn-F5 (Brightness down):

video LCDD 00000087 00000000
hotkey ATKD 00000020 000000fc

When hitting Fn-F6 (Brightness up):

video LCDD 00000086 00000000
hotkey ATKD 00000011 00000106

So each hotkey generates two events. Now let’s see how these events are handled. (Hard to see, as by now the screen is very dark. Bugger.)

Configure How acpid Handles Events

The configuration of “acpid” is in the “/etc/acpi/events” directory. Each file here handles one event type, line “event=regexp” defines the event, where the regexp shall match something like above, while line “action=command” the callback.

Fn-F5 (down) video LCDD 00000087 00000000 is handled by file “video_brightnessdown”:

event=video.* 00000087

Fn-F5 (down) hotkey ATKD 00000020 00000000fc is handled by “asus-brightness-down”:

event=hotkey (ATKD|HOTK) 0000002[0123456789abcdef]

Fn-F6 (up) video LCDD 00000086 00000000 is handled by file “video_brightnessup”:

event=video.* 00000086

Fn-F6 (up) hotkey ATKD 00000011 0000000106 is handled by “asus-brightness-up”:

event=hotkey (ATKD|HOTK) 0000001[0123456789abcdef]

As you can see the callback scripts are in “/etc/acpi”.

Test the acpid Callback Scripts

Running all four callback scipts directly from the command line revealed they don’t work at all. Absolutely no effect on brightness. That’s why I now ignore their contents completely.

The test revealed something else as well: the broken function of both hotkeys comes from outside of this acpid-config mechanism. Probably the kernel. Which I won’t try to fix, I’ll just create a workaround.

The Fix

I linked the fixed callbacks to the second event for each hotkey, “hotkey ATKD 00000020″ (down) and “hotkey ATKD 00000011″ (up). Configured by “asus-brightness-down” and “asus-brightness-up”, respectively. I’ve removed the other two config files (video_brightnessdown/up) completely, which were handling the first event for each hotkey.

The new callback script for brightness down reads the actual value from a new config file (/etc/acpi/brightness), decrements it by 6, and stores it to the config file AND the “/proc/acpi/video/VGA/LCDD/brightness” file as well.

if [ ! -f /etc/acpi/brightness ]; then echo 88 > /etc/acpi/brightness; fi
BRIGHTNESS=`cat /etc/acpi/brightness`
if [ $BRIGHTNESS -gt 10 ]; then let BRIGHTNESS-=6; fi
echo $BRIGHTNESS > /etc/acpi/brightness
echo $BRIGHTNESS > /proc/acpi/video/VGA/LCDD/brightness

The new brighness up script is similar, just increments the value by 6.

if [ ! -f /etc/acpi/brightness ]; then echo 88 > /etc/acpi/brightness; fi
BRIGHTNESS=`cat /etc/acpi/brightness`
if [ $BRIGHTNESS -gt 10 ]; then let BRIGHTNESS+=6; fi
echo $BRIGHTNESS > /etc/acpi/brightness
echo $BRIGHTNESS > /proc/acpi/video/VGA/LCDD/brightness

The final touch: the callback script for AC/battery events ( also writes the config file to guarantee we always start changing the brightness from the actual value.

for x in /proc/acpi/ac_adapter/*; do
  grep -q off-line $x/state

  if [ $? = 0 ] && [ x$1 != xstop ]; then    
    for SCRIPT in /etc/acpi/battery.d/*.sh; do
    . $SCRIPT
    echo 52 > /etc/acpi/brightness
    echo 52 > /proc/acpi/video/VGA/LCDD/brightness
    for SCRIPT in /etc/acpi/ac.d/*.sh; do
    . $SCRIPT
    echo 88 > /etc/acpi/brightness
    echo 88 > /proc/acpi/video/VGA/LCDD/brightness

Now, when hitting the brightness hotkeys, the screen switches to the darkest setting for a moment, but then it works. Perfect. Nearly.